top of page

Description: Part # 104423

MrSteam's MX Water Level Probe is for MX4, MX5 and MX6 generators only.


- Accurately reads water level in tank to keep a fluffy steam

- Made from Stainless steel construction

- 13/16" socket to remove probe

- Your probe may not look exactly like this one, as MrSteam has upgraded their probe recently. This will work with any year model stated above.


Tips and Tricks:

  •  You will need a 5/16" nut driver to remove the purple wire
  •  To remove the probe, you will need a 1/2" socket and ratchet
  •  Once removed, replace old probe with newly purchased probe, making sure you use teflon tape on the threads! (DO NOT USE PIPE DOPE)
  •  Tighten down probe
  •  Make sure both 5/16 nuts are snug on top of the ceramic piece of the probe. If not you will need to remove the top nut and very lightly snug up the bottom nut.
  •  Once bottom nut is snug, install purple wire and top nut. Lightly snug nut on top of wire.



- All parts will be subject to a 25% restocking fee (buyer pays shipping)

- All installed product cannot be returned.

MrSteam - Water Level Probe (MX units only) - Part # 104423

    bottom of page